Fab Speakers

Soldering the bigger components

From the bottom, insert the switch in the three equally-sized holes and solder it in place.

From the bottom, insert the switch in the three equally-sized holes and solder it in place.

It should look something like this.

It should look something like this.

Also from the bottom, insert the battery holder in the holes and solder in place.

Also from the bottom, insert the battery holder in the holes and solder in place.

From the top, insert the three wires of the audio cable, with the fatter wire in the middle hole.  Solder in place and clip off the excess.

From the top, insert the three wires of the audio cable, with the fatter wire in the middle hole. Solder in place and clip off the excess.

Leave a Reply