Fab Speakers

Wall-Mounted Variation

As shown in the photo below, there’s also a wall-mounted, oval-shaped variation on the design. It uses the same circuit board, but combines both speakers into a single unit that can hang on a nail or screw in the wall. You’ll want to replace the batteries with a 5V power supply (included in the bill of materials); just cut off the connector and solder the wires directly into the + and – holes for the battery holder. You’ll also want to omit the power switch and just solder together the holes where it would have gone.

Download: fab-speakers-oval.svg.zip

IMG_5155

Leave a Reply